The MPA mobile pump unit is a new product on the market that is characterized by its simple construction, its ability to reach high pressures, its light weight, ease of movement and ease of maintenance. The single-stage centrifugal pump is coupled with a diesel engine. The coupling takes place directly on the flywheel housing or on the engine, and the shaft is coupled to the flywheel via the electrical coupling. The units with a good design and small proportions are placed on a smooth-running trolley with two or four wheels and a height-adjustable support for connecting the motor vehicle or tractor. The trailer is equipped with signal lights and a handbrake.
For the self-priming of the pump, an injector serves as a self-priming device, the exhaust gases from the drive motor of the pump serve as support. Please attach the following note here:
PLEASE NOTE: The photo showing the mobile pump unit is only for an overview and may not show the actual size.
Typ Model. | Volt Voltage V | Stromstärke Current A | Förderhöhe max. Lift m | Fördermenge max. flow l/min | Saugstutzen Inlet mm | Druckstutzen outlet mm | Drehzahl regelung Speed regulation | Trockenlauf schutz Dry run protection |
DC30A | 5 – 12 V | 0,1 – 0,35 | 3 m | 4 l/min | 8 | 8 | kundeseitig customer side | optional |
DC40 | 6 – 24V | 0,15 – 1,2 A | 8 m | 11 l/min | 14 | 10 | PWM 0-5V Anleitung / manual | optional |
DC40A | 6 – 24V | 0,15 – 1,2 A | 6 m | 14 l/min | 14 | 14 | PWM 0-5V Anleitung / manual | optional |
DC40C | 6 – 24V | 0,15 – 1,2 A | 6 m | 15 l/min | ½“ Gewinde tread | ½“ Gewinde tread | PWM 0-5V Anleitung / manual | optional |
DC40D | 6 – 24V | 0,15 – 1,2 A | 8 m | 11 l/min | 10 mm | 10 mm | PWM 0-5V Anleitung / manual | optional |
DC40F | 6 – 24V | 0,15 – 1,2 A | 6 m | 16 l/min | ½“ Gewinde tread | ½“ Gewinde tread | PWM 0-5V Anleitung / manual | optional |
DC40H | 6 – 24V | 0,15 – 1,2 A | 11 m | 7,5 l/min | 11 mm | 8 mm | PWM 0-5V Anleitung / manual | optional |
DC40M | 6 – 12V | 0,4 – 0,75A | 3,5 m | 8,8 l/min | 13 mm | 11 mm | PWM 0-5V Anleitung / manual | optional |
DC50A | 6 – 24V | 0,15 – 4,5A | 5 m | 60 l/min | 27 mm | 27 mm | PWM 0-5V Anleitung / manual | optional |
DC50B | 6 – 24V | 0,15 – 4,5A | 13 m | 30 l/min | 20 mm | 20 mm | PWM 0-5V Anleitung / manual | optional |
DC50C | 6 – 24V | 0,15 – 4,5A | 6,5 m | 42 l/min | ½“ Gewinde tread | ½“ Gewinde tread | PWM 0-5V Anleitung / manual | optional |
DC50D | 6 – 24V | 0,15 – 4,5A | 8 m | 42 l/min | 20 mm | 20 mm | PWM 0-5V Anleitung / manual | optional |
DC50E | 6 – 24V | 0,15 – 4,5A | 15 m | 25 l/min | ½“ Gewinde tread | ½“ Gewinde tread | PWM 0-5V Anleitung / manual | optional |
DC50F | 6 – 24V | 0,15 – 4,5A | 15 m | 25 l/min | ½“ Gewinde tread | ½“ Gewinde tread | PWM 0-5V Anleitung / manual | optional |
DC50G | 6 – 24V | 0,15 – 4,5A | 8 m | 40 l/min | ½“ Gewinde tread | ½“ Gewinde tread | PWM 0-5V Anleitung / manual | optional |
DC50H | 6 – 24V | 0,15 – 4,5A | 20 m | 10 l/min | 14 mm | 7 mm | PWM 0-5V Anleitung / manual | optional |
DC50K | 6 – 24V | 0,15 – 4,5A | 16 m | 23 l/min | 14 mm | 14 mm | PWM 0-5V Anleitung / manual | optional |
DC50M | 6 – 24V | 0,15 – 4,5A | 13 m | 23 l/min | ½“ Gewinde tread / M20 | ½“ Gewinde tread / M20 | PWM 0-5V Anleitung / manual | optional |
DC80B | 6 – 24V | 0,5 – 6,6A | 12 m | 57 l/min | 25 mm | 25 mm | PWM 0-5V Anleitung / manual | optional |
DC80D | 6 – 24V | 0,5 – 6,7A | 12 | 55 l/min | 20 mm | 20 mm | PWM 0-5V Anleitung / manual | optional |
DC80E | 6 – 24V | 0,5 – 6,8A | 12 m | 55 l/min | ½“ Gewinde tread | ½“ Gewinde tread | PWM 0-5V Anleitung / manual | optional |
DC80G | 6 – 24V | 0,5 – 6,6A | 12 m | 55 l/min | ¾“ Gewinde tread / 25mm | ¾“ Gewinde tread / 25mm | PWM 0-5V Anleitung / manual | optional |
DC80D | 6 – 24V | 0,5 – 6,6A | 8 m | 105 l/min | 38 mm | 38 mm | PWM 0-5V Anleitung / manual | optional |
DC80E | 6 – 24V | 0,5 – 6,6A | 11 m | 80 l/min | 32mm 1 inch tread | 32mm 1 inch tread | PWM 0-5V Anleitung / manual | optional |